Walk in Battery Altitude Test Chamber
Walk in Battery Altitude Test Chamber

Walk in Battery Altitude Test Chamber

Walk in battery altitude test chamber is mainly used for battery testing, and can be customized according to test requir

Product Details
Walk in Battery Altitude Test Chamber


Walk in battery altitude test chamber is used to simulate test environments at different altitude, nd can be customized according to test requirements. This is especially important for defense and aerospace applications where pressure and vacuum conditions are worse,such as aviation, aerospace, communications, electronics and electrical applicances. The test objective is to ensure the maximum possible quality and reliablity of the product or material at different heights.


Vacuum pressure 1 ~ 100Kpa
Vacuum control Touch Screen Controller
Vacuum unit switch Kpa/Mpa
Temperature range RT ~ 0℃
Pumping rate Rise rate 305m per 30-60s until setting pressure is achieved.
Pressure holding time 0~999h/m/s
Inner size 400X500X500mm (100L)
Internal material SUS# 304 Stainless Steel
External material Steel plate with paint coating
Power Single phase, 220V/50HZ
Test condition ASTM D4169 Schedule I, ASTM D6653


Step 1: Select your vacuum chamber which capable of appropriately withstanding 1 atm pressure differential across the walls. The vacuum gauge must be sealed to the chamber and capable of a vacuum range from 0 to 100 kPa.
Step 2: Determine your sampling method which should be representative of your sample to permit adequate determination of performance. If you cannot determine a good sample size, at least 3 representative samples must be selected for performance evaluation.
Step 3: Test specimen must be conditioned to 5.6 +/- 2 Degrees Celsius for 24 hours prior to testing. Test specimens must also be tested at 5.6 +/- 2 Degrees Celsius.
Step 4: Place the Test Specimen into the Vacuum Chamber and turn the vacuum source by making the vacuum rise by 1000 ft or 305 m for every 30 to 60 seconds until the appropriate pressure/vacuum is achieved.
Step 5: Attain a pressure equivalent of 4,877 m +/- 5%; this correspond to an absolute pressure of 56.3 kPa, or 16.22 in Hg. An elevation of 4,267m may be aimed for if 4,877 m is not achievable or inappropriate; this corresponds to an absolute pressure of 59.5 kPa.
Step 6: Maintain the achieved vacuum for 60 minutes.
Step 7: After the 60 min vacuum hold time has elapsed, release the vacuum at a rate of 1000 ft or 305 m for every 30 ~ 60 seconds.
Step 8: Once vacuum has been released, open the chamber, and examine your specimen for damage or deformation.


1.Professional Manufacturer of various kinds of testing equipment over 15 years, defect rate is controlled under 0.02%.
2. Completely Production Line. From Raw Material to Delivery, all links are under our control. The quality can be assured.
3. ISO 9001:2008 Quality Management System Certificate.
4. OEM/ODM Service. Just tell us your idea! Our R&D Team is standing by…
5. Our Marketing Investigation Department will send Marketing Research Report to you each season.
7. We accept 100% inspection.
8. Guarantee Period: 365 days, After Sales Service Department provides professional service with you, any questions, just contact us.

Product number HD-E714 Brand Haida
price unit Set
Minimum order quantity 1 Supply Capacity 20 sets/Month
payment method L/C , T/T , D/A , D/P , Western Union , MoneyGram ,ect. Certification CE,ISO
Place of origin Guangdong, China Packing details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.