Home
Vibration And Shock Test
Temperature Humidity and Vibration Test System

Temperature Humidity and Vibration Test System

Temperature humidity & vibration test system is mainly used for battery testing, and can be customized according to

Product Details

Temperature Humidity and Vibration Test System

PRODUCT DESCRIPTION

Temperature humidity and vibration test system adopts test for aerospace products, automotive, electrical appliances and instruments, materials, coating and other parts under temperature & humidity and vibration environment condition. It’s widely used to do environmental endurance test, reliability growth test, reliability qualification test, product reliability acceptance test, routine test, environment stress screening test and so on.

SPECIFICATIONS OF CLIMATE CHAMBER

Item	Specification
Internal chamber dimension (WDH)	100010001000mm
External chamber dimension(WDH)	120030003800mm approx.
Temperature range	-40 ℃~ 150℃
Temperature fluctuation	±0.5℃
Temperature uniformity	2℃
Cooling speed(temp. Range: 85C~-40C)	5℃/min in average; without loading
Heating speed(temp. Range: -40C~85C)	5℃/min in average; without loading
Humidity range	10~98%RH (please refer to the below humidity curve)
Humidity fluctuation	±3%RH
Internal chamber material	SUS#304 stainless steel, mirror finished
External chamber material	Stainless steel with paint spray
Cooling method	Water-cooled
Controller	Programmable control temperature and humidity Can set different parameter for cyclic test
Insulation material	50mm high density rigid Polyurethane foam
Heater	Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
Compressor	German Bock compressor
Refrigerant	Environmental friendly refrigerant R449A/R23
Temperature sensor	PT-100 dry and wet bulb sensor
Observation window	Tempered glass
Testing hole	2 units with diameter 100mm, for cable routing
Sample tray	SUS#304 stainless steel, 2pcs
Safety protection device	Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit

STANDARD SPECIFICATION OF VIBRATION SYSTEM

Vibration Shaker
Max. Sine Force	3200Kg.f peak
Max. Random Force	3200Kg.f r.ms
Max. Shock Force	6400Kg.f peak
Frequency Range	2~3000Hz
Displacement (p-p)	51 mm
Max. Velocity	2m/s
Max. Table Acceleration	100g (without loading)
Armature Diameter	335mm
Effective Armature Mass	30kg
HE/ST screw dimension	17×M10
Max. Load Capacity	300kg
Magnetic Leakage	＜10gauss
Axial Vibration Isolation Frequency	<2.5Hz
Power	Three-phase, 380V, 50Hz
Machine dimension	845mm790mm840mm; without expander table
Vibration controller system
Controller Hardware	No of input channels: 02 analogue channels ADC: 24-bit Resolution No of output channels: 01 DAC: 24-bit Resolution USB 2.0 communication port
Controller Software Modules	Random Vibration (1-5000Hz), Sweep Sine Vibration (1-5000Hz), Classical Shock, Resonance Search, Track and Dwell and Self Calibration
Other accessory	Test Computer: LENOVO M4500 Printer: HP 1020plus
Customer Responsibilities	Installing all utilities where required, including connecting utilities to the equipment Installation/rigging of equipment Completing any necessary building alterations including roof penetrations Customers responsible for any permits required by - local/state government

HORIZONTAL SLIP TABLE & VERTICAL HEAD EXPANDER

STANDARD SPECIFICATIONS

Expander
Expander Size	600*600mm
Material	Aluminum alloy with hard anodized surface
Max. Work Frequency	Sine: 1000Hz Random: 2000Hz
Weigh	32kg
Slip Table
Table Size	600*600mm
Material	Aluminum alloy with hard anodized surface
Max. Work Frequency	Sine: 1000Hz Random: 2000Hz
Weight	35kg
Note: 1. High pressure oil-film bearing is used for better uniformity.

POWER AMPLIFIER AND BLOWER

STANDARD SPECIFICATIONS

Power Amplifier
Max. Output Power	32kVA
Frequency response	＞65 dB
Output Voltage	120V
Conversion Efficiency	＞90%
Blower
Power	15
Air volume	0.66
Wind pressure	0.075kgf/cm2
Air horse diameter	200

SAFETY ACCESSORIES (Hazard Levels 5)

SAFETY EQUIPMENT	SPECIFICATION
Status indicator	The tower light has 3 signal levels (white, green, and red) to quickly alert the operator of any abnormal conditions
Electrical door lock	The test space door is locked via an electrical door lock during automatic and manual tests. In automatic mode the complete testing system can be switched off during a program interruption, in order to allow the unlocking of the test space door
Reversible pressure release flap	This device is installed on the top of chamber
Mechanical door lock	Except reversible pressure release flap, two fasteners which mechanically hold the door closed are attached to the test space door
Sealing plug and retaining clamp	One 50mm or 100mm diameter cable port on left with flexible silicone plug
Fire detection via CO gas measuring or temperature sensor	The system is equipped with a control unit, an alarm panel, an emergency button, a thermostat with dedicated temperature probe and a system with a CO2 cylinder. The CO2 discharge is activated by exceeding a temperature threshold (settable by the user) measured by a dedicated PT100 or by exceeding the CO2 threshold inside the chamber The detection system, provided with its own power supply, activates the CO2 in the chamber. The CO2 bottle is empty
Flushing device with N2 or with CO2	Monitors the gases in the chamber in all operating conditions

COMPANY INTRODUCTION:

HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 15 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.

SEE WHAT COMPANY YOU WILL WORK WITH?

1.Professional Manufacturer of various kinds of testing equipment over 15 years, defect rate is controlled under 0.02%.
2. Completely Production Line. From Raw Material to Delivery, all links are under our control. The quality can be assured.

3. ISO 9001:2008 Quality Management System Certificate.

4. OEM/ODM Service. Just tell us your idea! Our R&D Team is standing by…
5. Our Marketing Investigation Department will send Marketing Research Report to you each season.
6. We are trusted by SCS, INTERTEK, HST, COFCO, ESC, KBMC, LENOVO, PANASONIC, EMC, etc.
7. We accept 100% inspection.
8. Guarantee Period: 365 days, After Sales Service Department provides professional service with you, any questions, just contact us.

Product number	HD-E809	Brand	Haida
price		unit	Set
Minimum order quantity	1	Supply Capacity	20 sets/Month
payment method	L/C , T/T , D/A , D/P , Western Union , MoneyGram ,ect.	Certification	CE,ISO
Place of origin	Guangdong, China	Packing details	Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.