PLC Controller Constant Temperature And Humidity Test Chamber
PLC Controller Constant Temperature And Humidity Test Chamber

PLC Controller Constant Temperature And Humidity Test Chamber

Constant temperature and humidity test chamber can simulate various temperature and humidity environment, suitable for t

Product Details
              PLC Controller Constant Temperature And Humidity Test Chamber


Constant temperature and humidity test chamber provides a wide temperature and humidity control range. It is using to simulate severe high temperature, low temperature or damp heat environment .Customer can select suitable models based on performance and test area capacity.
It is widely used in various industries, such as electronic instruments and meters, new materials, electricians, vehicles, metals, electronic products, aerospace materials , which may encounter environmental condition during transportation, storage, and in-using


1.1 Cooling System
1 The refrigerating system equips France Tecumseh, and uses environmentally friendly refrigerant (R404a). Adopting binary low temperature circuit system design, it is convenient to use different compressors for work in different temperature regions.
2 Temperature and humidity control using P.I.D + S.S.R system coordinated control with the same channel. It has the function of automatic calculation, which can immediately modify the temperature and humidity change conditions to make the temperature and humidity control more accurate and stable.
3 High-precision controllers of temperature and humidity. The relative temperature and humidity performance is accurately set and displayed with a resolution of 0.1℃.
1.2 Temperature and Humidification System
1 Temperature system using Nickel-chromium alloy high-speed heating electric wire;
2 High temperature system is completely independent;
3 The humidity system using stainless steel tube built-in nickel-chromium alloy high-speed heating electric wire and high-temperature magnesium oxide powder, which has fast response and long life;
4 The temperature and humidification system is completely independent, and humidity has automatic water supplement device.
1.3 Control System
Temp. & Humid. Sensor High precision PT100 Platinum resistance
Controller Weintek
Display Function a. Temp. & humid. Setting (SV) Practical (PV) value can be displayed directly
b. Display numbers, paragraphs, remaining time and cycles, running time
c. Program editing and graphic curve display,
d. Fixed or program operation status display,
Interface a. RS-232 or R485 port design
b. Connected to computer
c. Monitor and remote control by computer and Ethernet optional
1.4 Protection System
1 Protection for Electrical leakage
2 Over-temperature
3 Compressor overvoltage and overload
4 Heater short circuit
5 Water shortage

2.1 Capacity and Material
Internal dimension(W*D*H) 1000*800*1000mm(800L)
External dimension(W*D*H) 1280*1690*2000mm
Internal material 1.2mm thickness SUS#304 stainless steel, mirror finished;
External material 1.2mm thickness cold-rolled steel plate baking
2.2 Temperature
Temperature Range -40℃ ~ + 150℃
Temperature fluctuation ±0.5℃
Temperature uniformity ≤2℃
Temperature Rate 1℃/min in average (without loading)
3℃/min in average (without loading)
2.3 Humidity
Humidity Range 20%~98%RH
Humidity fluctuation ±3%RH
Humidity uniformity ±2%RH
Temp. &Humid. Chart
2.4 Power Supply  
Power Source Three-phase, 380V, 50Hz
Power 13.5kw
Current 30.8A
Weight Approx. 600kg
2.5 Cooling System and Others
Compressor Imported France Tecumseh compressor
Refrigerant R404A/R23
Cooling method Single-stage compression
Cooling method Air-cooled flake condenser, cooling fan for heat dissipation
Humidification system Stainless steel humidifier
Water Supply Front-mounted water tank, automatic water supply system
Heating System Nichrome stainless steel heater
Sample tray SUS#304 stainless steel 2 pieces
Testing hole Diameter 50mm, for cable routing
Evaporator Finned tube heat exchanger
Dry filter Absorb the residual moisture and acidic substances in the refrigerant of the refrigeration system, and filter out solid particles, copper shavings, etc. in the system to protect the normal operation of the expansion valve and capillary tube, and prevent ice blocking and dirty blocking.
Door handle Non-reaction, explosion-proof door handle, easy to operate, safe and reliable
Insulation 100mm polyurethane rigid foam and 100mm high density glass fiber cotton
Insulation system Filling the insulation area with ultra-fine glass fiber;
Machine connection parts are made of non-metal resistant high and low temperature materials, which effectively reduces the temperature conduction;
Door seal is made of refined silicone rubber, which is more reliable seal;
Using isolated humidification method
Observation window Double-layer vacuum-strengthened glass;
Heat-resistant defrosting on the inside with adhesive sheet conductive film, which can clearly observe inner chamber.
2.6 Test Standard
1 IEC6008-2-1 Cold
2 IEC6008-2-2 Dry Heat
3 IEC60068-2-38 Damp Heat, Cyclic

  1. To simulate test environment with different temperature and humidity
  2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
  3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
  4. Uncover test unit weakness in a short-term test with accelerated time effect

  1. PLC controller for test chamber
  2. Step types include: ramp, soak, jump, auto-start, and end
  3. RS-232 interface to connect computer for output


Haida International Equipment Co,Ltd is a National "High-tech Enterprise"(certified in 2016),integrating R&D,manufacturing and brand marketing.Our textile testing instruments meets with the requirements of ISO, ASTM, AATCC, BS, GB, DIN, EN, JIS. We are committed to providing high quality testing instruments.We always adhered to the strict and professional concept and strictly control the quality of products, and provide our customers with high-quality testing instruments,first-class service and competitive prices.

We are looking forward to cooperating with customers all over the world. We can not only offer standard textile testing machines, but also customized machines according to your request. Our professional team and global agents(United Kingdom, Vietnam, Bengal, Malaysia&Singapore, Turkey and Pakistan)will provide you with comprehensive pre-sales consultation and timely after-sales service.Don't hesitate to tell us your requirement, we will do our best to meet your needs.

Product number HD-E702-800 Brand Haida
price unit set
Minimum order quantity 1 Supply Capacity 30 sets/Month
payment method L/C , T/T , D/A , D/P , Western Union , MoneyGram ,ect. Certification ISO,CE
Place of origin Guangdong, China Packing details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.