Battery Three-zone Thermal Shock Chamber
Battery Three-zone Thermal Shock Chamber

Battery Three-zone Thermal Shock Chamber

Battery three-zone thermal shock chamber is used to test the material structure or composite material, under the in

Product Details
Battery Three-zone Thermal Shock Chamber

Product Introduction:

Hot And Cold Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, it is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB and so on .

Main Technical Parameters:  
Model HD-E703-200K40 HD-E703-200K55 HD-E703-200K65
Nominal content productL 200
Inside the box sizemm 650×450×670W×H×D
Overall dimensionsmm 1530×1800×1980W×H×D
Technical parameters Temperature range

High temperature RT170
Low temperature 75℃ ~RT
Test area 40℃ ~150 50℃ ~150 65℃ ~150
Temperature shock range High temperature 60℃ ~150
Low temperature 10℃ ~-40 10℃ ~-50 10℃ ~-65
Normal temperature zone Indoor temperature
Temperature and humidity deviation ±0.3℃,±2%R·H
Difference in temperature and humidity ±2℃,±3%R·H
Heating rate 2/min
Cooling rate 0.5~1.2/min
Cold storage time RT→75≤  65min
Thermal storage time RT→170≤  35min
Refrigeration system Compressor Imported German blog, R23 / R404A refrigerant
Cooling way Water or air cooling
Condenser Stainless steel brazed plate type heat exchanger
Heater/evaporator Nickel-chromium electric heater/finned evaporator
Microcomputer & display screen TT-5188T3-7HLTaitong controller
Drive motors Drive
Temperature and humidity sensor Japan
Safety measures No fuse switch, compressor overpressure, overheat, overcurrent protection, fuse, water flow protection, phase sequence protection, oil pressure protection, pressure relief protection, low pressure protection, pressure cylinder protection, temperature limit protection
Material Chassis shell High quality cold rolled steel sheet is sprayed with static electricity
Inner wall of the chassis SUS304# Stainless steel plate
Heat preservation material Polyurethane rigid foam + high density fiberglass cotton
Standard configuration Test hole, floodlight, double vacuum bulletproof glass observation window
Max. power  
Power supply three-phase380V50Hz

Test Standard:

2、GB/2423.22-2012/IEC 60068-2-14:2009
3、GB/T 2424.13-2002/IEC 60068-2-33:1971
5、GB/T 2423.1-2008/IEC6008-2-1-2007
6、GB/T 2423.2-2008/IEC60068-2-2:2007
7、GB/T 10589-2008
8、GB/T 11158-2008

Quality Control

A) Quality assurance items

The guarantee period with FOC within one year (not including nonexpendable & transport and travel fees)

During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part(just for nonexpendable part) induced by non-human damage;
If any quality problems occurs within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by customer;
If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by customer, also charge for a favorable price;
Haida will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance;
B) The main quality warranty maintenance certificate

If there is any dispute please refer to our guarantee letter, so:

1. please keep the guarantee letter, if you lost it, please connect with us in a month.

2. If the guarantee letter has been altered or it has no our stamp, it is useless.

C) The following conditions need to be paid reasonably even in the assurance period:

1. Natural reasons

2. Operating mistakes

3. Voltage is not fit for our operation instruction

4. Repack it without our guides

5. Damaged for borrowing to others

6. Damaged for authorized machine modification

7. Damaged for authorized calibration

8. Authorized transshipment mistake

9. Serve for long distance area

Product number HD-E703-200 Brand Haida
price unit set
Minimum order quantity 1 Supply Capacity 30 Set/Sets per Month
payment method Certification ISO,CE
Place of origin Guangdong, China Packing details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.