Nowadays, "low carbon life" has become a living habit, which can not only reduce production costs, but also make the environment better. And we want to introduce some commonly used power-saving tips of constant temperature and humidity chamber. Hope to give you some help.
The climatic chamber should be put in a cool and ventilated place to avoid direct sunlight and heat. When placed, there should leave some place to let the chamber abstract heat, because the high ambient temperature will increase the power consumption of it.
After been used for a period of time, the chamber will frost. If not regular defrosting will affect the cooling system, increase the power consumption, or even easy to damage the compressor. Therefore, defrosting should be carried out whenever the frost is seen to be more than 7cm thick.
Every time you open the door, there will be fresh air came in, the chamber have to run the compressor again. Therefore, when putting in the sample, it is necessary to reduce the number and time of opening the door, the actions should be quick and the opening angle should be as small as possible.
Always pay attention to clean the chamber. The surface of compressor and condenser should be cleaned every two to three months. The more dust accumulated, the worse the heat dissipate, and the more the power consumption. When cleaning, do remember cutting off the power supply and wipe it with a wet cloth.
After getting this tips, you can reduce the power same time, it can extend the service life of the chamber. If you want to know more about the climate chamber, you can contact us, and our technical engineer will answer you.