Walk-in Sand and Dust Test Chamber
Walk-in Sand and Dust Test Chamber

Walk-in Sand and Dust Test Chamber


Sand and Dust Test Chamber is widely used to do dust resistance of electronics, auto components, sealed products wh


Product Details
Technical Parameters

Walk-in Sand and Dust Test Chamber 

 

Chamber structure
Programmble Dust Testing Chamber
1, Chamber material: SUS#304 stainless steel;
2, Transparent window is convenient to observe specimen during testing;
3, Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;
4, Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.

Working condition
Programmable Dust Testing Chamber
1, Temperature: 15~35'C; Relative humidity: 25~75%R. H;
2, Without strong vibration and Electromagnetic effect around;
3, Test chamber should be stable placed and keep balance;
4, Installation place should keep good ventilation, and without strong airflow, high dust and corrosive material.

 

Detail Image

(Test Device)

Product Parameters

Item

Specification

Internal chamber size (W*D*H)

1500*1500*2300mm

External chamber size (W*D*H)

2200*2000*3200mm

Chamber door

Double door (size 1200*2000m) with observation window in tempered glass, single door size 600*2000mm

Temperature range

Ambient+10 to 70 with heating system

Air flow velocity

<2m/s

Dust quantity

2~4kg/m3

Dust

Talcum powder (pass mesh hole 75um, mesh metal wire diameter 50um)

Testing time

1s~999hr, adjustable

Internal chamber material

SUS#304 stainless steel

External chamber material

Stainless steel

Specimen pressure difference

A lower than atmosphere pressure 0.98KPa, or B no pressure difference

Vacuum system

Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump

Controller

PLC controller, touch screen

Operation mode: program and fixed

Cable port

Diameter 50mm for sample cable routing

Protection device

Motor fan overcurrent alarm

Power phase protection

Auto stop and cut off power

U-stop for emergency

Power supply

Three-phases, 380V, 50Hz

Test criteria

IEC 60529 – IP5X & 6X

Chamber type

Assembly type, ship in parts and assemble at buyer site

Product number HD-E706 Brand Haida Equipment
price unit
Minimum order quantity 1 Supply Capacity
payment method Certification
Place of origin Guangdong, China Packing details Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside.