Item | Specification |
Drive mode | hydraulic drive |
Extrusion direction | a. For a cylindrical battery, the longitudinal axis of the extruded battery should be parallel to the two plates of the extrusion device; b. For square and soft pack batteries, squeeze the wide side of battery only; c. For the coin type or button type battery, the extrusion test is performed by using the upper and lower planes of the battery in parallel with the flat plate; |
Squeeze force range | 1 kN ~ 20kN |
Pressure display accuracy | 0.1N |
Sensor resolution | 1/1000 |
Unit conversion | kg, N, lb |
Data sampling frequency | 80 times/sec |
Effective test space(W*D*H) | 200*200*200mm |
Extrusion stroke | 250mm |
Delay function | 0-9999 (H/M/S can set and adjust test time arbitrarily) |
Clamping method | manual clamping |
Machine dimension(W*D*H) | 800*800*1800mm |
Power supply | 3-phase, 380V, 50Hz |
Internal chamber material | 1.2mm thick stainless steel plate with Teflon; strong corrosion resistance and flame retardant |
External chamber material | 1.5 mm thick A3 cold plate paint treatment |
Observation window | Two-layer vacuum tempered glass observation window with size 250*250mm |
Exhaust port | Diameter: 100mm; it start work once when machine operate |
Door safety device | Open and power off threshold switch |
Test hole | A test hole with a diameter of 50 mm on the left side of the machine |
Product number | HD-H205 | Brand | Haida |
---|---|---|---|
price | unit | USD | |
Minimum order quantity | 1 | Supply Capacity | 150 Set/Sets per Month |
payment method | Certification | ISO,CE | |
Place of origin | Guangdong, China | Packing details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |